Adapting The Tube Adapter Length - Otto Bock Genium X3 Setup Manual

3.1 Adapting the tube adapter length

1 Leave the knee flexed when disconnecting the tube adapter.
2 Open X-Soft, create a new user, and open a new job.
3 Do not connect to the knee! First, click on the "Job Speci-
fications" tab and then click on the "Ankle adapter configu-
ration tool".
4 Open the tube adapter configuration tool.
Please note, that the knee
center-ground distance from
the prosthetic side may be
significantly different than the
knee center ground on the non
prosthetic side: for example
long residual limb.
5 Fill in the requested information.
6 The correct cutting length is displayed in the last line.
Genium X3 Set-up Guide | Ottobock 9