Information And Safety Signals - Otto Bock Genium X3 Setup Manual

6 Information and safety signals

Note: When the Mute Mode is active, all vibration and beep signals are disabled.
Beep signal after bouncing up and down* in basic mode
3×
Bouncing recognized to switch
4×**
Bouncing recognized to switch
Beep signal after bouncing up and down in MyMode
≥ 3×
Bouncing recognized to switch
Vibration signals
Symbols and Colours used:
short long
beep signal beep signal
1× 1× 1 s
+
1× 1× 1 s
+
1× 1× 1 s
+
short
vibration signal
1× 1×
1× 1×
* switching by bouncing up and down has to be activated in X-Soft
** 4× bouncing up and down has to be activated in X-Soft
1× 1×
** return to basic mode is also possible by attaching the charger
3×
5×
continuous
1×
every 5 seconds
3×
Information
long
Warning
vibration signal
Error
1 MyMode activated
st
2 MyMode activated
nd
Return to Basic Mode**
Charging status 25%
Charging status 10%
Charging status 0% or
no functionality
Hydraulic system overheated
Charger attached to knee joint
no action required
action required soon
action required immediately