Otto Bock Genium X3 Setup Manual page 19

Optimizing the Alignment
1 Check the height of the prosthesis and frontal alignment (using L.A.S.A.R. Posture).
2 Push the pause button and then make any needed adjustments to the static alignment.
Press the play button to take a new measurement or press the walk button to let the user walk.
3
4 Perform the dynamic alignment.
5 Check the alignment again using L.A.S.A.R. Posture and SASAR.
Options for optimization
Socket flexion Socket position Plantar flexion
Genium X3 Set-up Guide | Ottobock 19
Foot position
(combination!)