Waking Up And Charging - Otto Bock Genium X3 Setup Manual

1 Waking up and charging

Charging the knee completely before use is strongly recommended.
Connect the tube adapter + insert the tube adapter in the frame and take care that the cable
is placed in the tube.
Charge the knee completely: The five lights should glow when Genium X3 is fully charged.
When the charger is disconnected, the system will do a self test. The knee will beep and vibrate one time.
After disconnecting the charger the knee joint will conduct a self test. Be sure not to move the
knee joint during this brief self test, since it can cause an error.
4 Ottobock | Genium X3 Set-up Guide
1
4
2
5
3
6