Prerequisites; Logging Into The Unified Cm Administration Application; Creating A Sip Trunk Security Profile - Cisco MCS 7800 Series Administration Manual

Cisco systems multipoint switch administration guide
Hide thumbs Also See for MCS 7800 Series:
Table of Contents

Advertisement

Prerequisites

Prerequisites
Before starting the tasks in this chapter, make sure that the following conditions are met or that you
understand the following information:
For additional information about configuring Unified CM for Cisco TelePresence System, refer to the
Cisco Unified Communications Manager Installation Guide for the Cisco TelePresence System.

Logging into the Unified CM Administration Application

To log into the Unified CM Administration application:
Open a web browser.
Step 1
Access a web browser that is supported by the Unified CM Administration application from any user PC
Step 2
in your network. In the address bar of the web browser, enter the following URL:
where CUCM-server-name is the name or IP address of the server.
Note
Log in with your assigned administrative privileges.
Step 3
Select Cisco Unified Communications Manager Administration in the Navigation field at the upper
Step 4
right corner of the page and click Go to return to the Cisco Unified Communications Manager
Administration home page.

Creating a SIP Trunk Security Profile

To create a SIP trunk security profile:
Step 1
Click System. Under Security Profile, click SIP Trunk Security Profile.
Click the Add New button at the bottom of the page or click the + sign at the top of the page.
Step 2
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
2-14
Unified CM is running and using version 6.0 or later software.
Cisco TelePresence System is running version 1.2.3 or later software. For interoperability with
legacy video conferencing devices, Cisco TelePresence System must be running version 1.3 or later
software.
https:// CUCM-server-name
You may need to specify the address of the server where Unified CM is installed. If your network
uses DNS services, you can specify the hostname of the server. If your network does not use
DNS services, you must specify the IP address of the server.
Chapter 2
Configuring Cisco Unified Communications Manager for CTMS
OL-12586-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents