Configuring And Editing Unified Cm Settings; Configuring And Editing Sip Profile Settings - Cisco MCS 7800 Series Administration Manual

Chapter 4 Configuring CTMS Administration Software

Configuring and Editing Unified CM Settings

Figure 4-8
Figure 4-8
To configure or edit Unified CM settings:
Step 1 Click Unified CM Settings under the System Configuration folder in the Navigation Pane.
Step 2 Click the Unified CM Settings tab. Unified CM Settings displays a table providing the Unified CM
Settings configuration fields. Enter settings (as needed) as described in
Table 4-6
Field or Button
Unified CM 1 through 5
SIP Port
•
•

Configuring and Editing SIP Profile Settings

Figure 4-9
OL-12586-02
shows the Unified CM Settings screen.
Unified CM Settings
Unified CM Settings
Setting
Hostnames or IP address(es) of the Cisco Unified Communications
Manager (Unified CM) server.
Note
Port number for Cisco Unified SIP IP Phones that are using UDP to listen
for SIP messages from Unified CM. The default setting equals 5060.
To register new or modified settings, click Apply.
To restore the original settings, click Reset.
shows the SIP Profile Settings screen.
It is important to add all Unified CM servers in the cluster.
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
Cisco Unified Communications Manager Settings
Table 4-6
4-33