Cisco MCS 7800 Series Administration Manual page 46

Defining and Editing Default Settings
Figure 5-1
To define default settings:
Click Default Settings under the Meetings Management folder in the Navigation Pane.
Step 1
Default Settings displays a table providing the following configuration fields:
Step 2
Table 5-1
Field or Button
Switching Policy
Maximum Rooms
Video announce
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
5-44
Default Settings
Default Settings
Setting
Defines how CTMS calls are displayed during a meeting. CTMS displays
active speakers on screen. There are two active speaker display options:
• Segment: With segment switching, each individual table segment
(defined as a display and a camera) is displayed on the screen as that
segment becomes the active speaker.
Site: When you select "site," all table segments for a particular room
•
are displayed on screen when any segment in that room is the active
speaker.
Click the appropriate radio button to select.
Defines the maximum number of Cisco TelePresence rooms allowed to
dial into in a static multi-point meeting. The range is from 1 to 48.
If this option is selected, when a new attendee joins the meeting, the new
attendee is displayed for 2 seconds. Options are Yes and No. Click the
appropriate radio button to select.
Chapter 5 Managing Meetings
OL-12586-02