Importing And Exporting Files; Cisco Unified Communications Manager Settings - Cisco MCS 7800 Series Administration Manual

Importing and Exporting Files

Step 4 Click Shutdown to completely shutdown CTMS.
Importing and Exporting Files
Import/Export Files enables you to reuse previously defined user and configuration files (such as
meeting templates) when upgrading to a new version of CTMS Administration Software. To reuse
previously defined user and configuration files, you must first export the files to a secure location,
upgrade to the new version of CTMS Administration software, and then import the files.
Figure 4-7
Figure 4-7
To import or export files:
Click Import/Export Files under the System Configuration folder in the Navigation Pane.
Step 1
Click Export Files to import defined user and configuration files. Click Browse to select the exported
Step 2
user and configuration files, then click Install Config Files to unzip and install the files.
Click Import Files to import defined user and configuration files. Click Browse to select the exported
Step 3
user and configuration files, then click Install Config Files to unzip and install the files.

Cisco Unified Communications Manager Settings

Cisco Unified Communications Manager Settings (Unified CM) consists of two configuration areas:
•
•
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
4-32
shows the Restart CTMS screen.
Import/Export Files Settings
Configuring and Editing Unified CM Settings, page 4-33
Configuring and Editing SIP Profile Settings, page 4-33
Chapter 4 Configuring CTMS Administration Software
OL-12586-02