Cisco MCS 7800 Series Administration Manual page 85

Cisco systems multipoint switch administration guide
Hide thumbs Also See for MCS 7800 Series:
Table of Contents

Advertisement

Chapter 8
Interoperability with Legacy Video Conferencing Devices
Figure 8-4
Configure CUVC meeting characteristics for Cisco TelePresence Interoperability. CUVC meeting
characteristics are configured individually using the service prefix. Service prefixes define the
CUVC meeting characteristics, and are defined on the CUVC Administration page under Services.
From the Automatic Service Definitions page under Services as shown in
following attributes:
OL-12586-02
H.323 Configuration Screen
If you are using an H.323 Gatekeeper, define the Gatekeeper IP address and the Gatekeeper Port
as 1719.
If you are using an MCU as an H.323 trunk in Unified Communications, go to Advanced H.323
Settings on the CUVC Protocols configuration page and record the RAS port number and
Signaling Port parameter value. Use the Signaling Port value for the Unified Communications
H.323 Trunk Port definition.
Max Call Rate: 768 Kbps
Max layout: 1x1
Supported image size up to: CIF
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
Configuring Cisco TelePresence Interoperability
Figure
8-5, configure the
8-83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents