Creating A Sip Trunk; Configuring A Route Pattern - Cisco MCS 7800 Series Administration Manual

Configuring Cisco TelePresence Interoperability

Creating a SIP Trunk

To create a SIP trunk for CTMS calls to the CUVC:
Click Device. Click Trunk.
Step 1
Click the Add New button at the bottom or click the + sign at the top of the Trunk Configuration page.
Step 2
Select SIP Trunk from the Trunk Type pull-down menu, then click Next.
Step 3
Enter the settings as indicated in
Step 4
not included in
.
Table 8-2
Field
Device Information
Device Name
Description
Device Pool
SIP Information
Destination Address
SIP Trunk Security Profile
SIP Profile
Click the Save button at the bottom of the page.
Step 5

Configuring a Route Pattern

A route pattern allows a Unified CM-managed device to access another device by dialing its number.
Such devices may include gateways, Cisco TelePresence Multipoint Switch (CTMS) systems, or Cisco
Unified Video Conferencing (CUVC) units. Each device requires its own unique route pattern.
To configure a route pattern:
Click Call Routing. Under Route/Hunt, click Route Pattern.
Step 1
Click the Add New button at the bottom or click the + sign at the top of the Route Pattern Configuration
Step 2
page.
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
8-80
Table 8-2
Table 8-2.
SIP Trunk Settings
Required
Yes
—
Yes
Yes
Yes
Yes
Chapter 8 Interoperability with Legacy Video Conferencing Devices
to configure the SIP trunk. Leave default settings for fields
Setting
Enter a text string identifying this SIP trunk.
Enter a text string describing this SIP trunk.
Select Default.
Enter the IP address of the CUVC.
Select the SIP trunk security profile that you
created for CTMS.
Select Standard SIP Profile.
OL-12586-02