Show Network Route - Cisco MCS 7800 Series Administration Manual

show network route

show network route
Syntax Description
None
Command Modes
Admin
Command History Release
1.1
Usage Guidelines
Use this command to display basic network route information.
Examples
admin:show network route
10.94.150.0/24 dev eth0
169.254.0.0/16 dev eth0
default via 10.94.150.1 dev eth0
Example with failover (NFT) enabled:
admin:show network route
10.94.150.0/24 dev bond0
10.94.150.0/24 dev eth0
10.94.150.0/24 dev eth1
169.254.0.0/16 dev bond0
default via 10.94.150.1 dev bond0
Related Commands Command
show network all
show network eth0
show network failover Displays NIC Teaming network fault tolerance information
show network
ip_conntrack
show network
max_ip_conntrack
show network status
Cisco TelePresence System Release 1.4 Administrator's Guide
A-46
show network route
Modifications
This command was first documented.
proto kernel
scope link
proto kernel
proto kernel
proto kernel
scope link
Description
Displays all show network command information
Displays basic Ethernet 0 platform network information
Retrieves the current utilization of ip_conntrack
Retrieves the current ip_conntrack_max information
Displays basic network status information
Appendix A Command Line Interface (CLI) Commands
scope link src 10.94.150.94
scope link src 10.94.150.98
scope link src 10.94.150.98
scope link src 10.94.150.98
OL-12586-02