Set Password Admin - Cisco MCS 7800 Series Administration Manual

Appendix A Command Line Interface (CLI) Commands

set password admin

Syntax Description
None
Command Modes
Admin
Command History Command
1.1
Usage Guidelines
Use this command to set a new administrator password.
Note
Examples
admin:set password admin
Please enter the old password: ******
Please enter the new password: ********
Re-enter new password to confirm: ********
Related Commands Command
None
OL-12586-02
set password admin
Modifications
This command was first documented.
Passwords must be at least 6 characters, but not more than 64 characters in length, and can
contain upper and lower case alphanumeric characters and the underscore and dash characters.
The following usernames are not allowed: apache, daemon, nobody, operator, and shutdown.
Description
Cisco TelePresence System Release 1.4 Administrator's Guide
set password admin
A-19