Cisco MCS 7800 Series Administration Manual page 86

Configuring Cisco TelePresence Interoperability
Figure 8-5
Click the Advanced Management and Security button under Automatic Services to open the
Management and Security Screen. Click the Port Reservation and Limits tab. Configure the
following attributes:
–
–
–
From the Advanced Audio Settings page under Automatic Services, configure the following
attributes:
–
From the Advanced Video Settings page under Automatic Services, configure the following
attributes:
–
–
–
Click Upload for these changes to take effect.
The route pattern created for CUVC in Unified CM should match the CUVC number and service prefix
Note
configured in CUVC.
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
8-84
Automatic Service Definition Screen
Define the minimum number of guaranteed ports for interoperability conferences.
Check the Allow conference to grow over guaranteed value box.
Click OK.
Verify that G.711 is in the supported codecs list; select G.711.
Check Enable "No Self See" box.
Verify that H.264 is in the supported codecs list; select H.264.
Click Settings to enter welcome text as required.
Chapter 8 Interoperability with Legacy Video Conferencing Devices
OL-12586-02