Set Network Dns - Cisco MCS 7800 Series Administration Manual

Appendix A Command Line Interface (CLI) Commands

set network dns

Syntax Description
primary address
secondary address
Command Modes
Admin
Command History Release
1.1
Usage Guidelines
Use this command to define new IP addresses for primary or secondary DNS servers.
This command causes a temporary loss of network connectivity. If you want to continue with defining a
new address for the DNS server, type Yes. Otherwise, click any other key to abort.
Examples
admin:set network dns primary 1.2.3.4
*** WARNING ***
This will cause the system to temporarily lose network connectivity
Do you want to continue?
Enter "yes" to continue or any other key to abort
yes
Related Commands Command
set network ip eth0
OL-12586-02
set network dns {primary address | secondary address}
Defines a new address for the primary DNS server. Values for address are
valid dotted decimal IP addresses.
Defines a new address for the secondary DNS server. Values for address are
valid dotted decimal IP addresses.
Modifications
This command was first documented.
Description
Defines a new IP address and subnet mask for Ethernet 0
Cisco TelePresence System Release 1.4 Administrator's Guide
set network dns
A-17