Creating And Editing Static Meetings - Cisco MCS 7800 Series Administration Manual

Chapter 5 Managing Meetings
Table 5-1
Field or Button
Quality
Allow Downspeed
Idle Meeting Termination
Enabled:
Idle Meeting Termination
Time (minutes)
•
•

Creating and Editing Static Meetings

Static meetings are meetings that are permanently available after they have been configured. Each static
meeting has its own associated meeting number; meetings attendees dial into that specific number when
attending a static meeting. You can also add participants to a static meeting through the Active Meetings
page.
Static meetings use ad hoc meeting resources.
Note
Figure 5-2
OL-12586-02
Default Settings
Setting
This field sets the system bandwidth and screen resolution. A higher
bandwidth increases video quality, but may also cause packets to be
dropped and video to be interrupted. Choices:
•
•
•
•
•
•
Default is Highest Detail, Best Motion: 4Mbps 1080p.
When selected, if an endpoint joins the meeting with a lower Quality value
than other endpoints, the endpoint is allowed to join the meeting and all
other endpoints downgrade their Quality to match the lower value. If this
option is not selected, endpoints with a lower Quality value are not
allowed to join the meeting.
Options are Yes and No. Click the appropriate radio button to select.
When selected, the meeting is terminated if the system does not detect an
active speaker for the value set in the Idle Meeting Termination Time field.
Options are Yes and No. Click the appropriate radio button to select.
If the Idle Meeting Termination Enabled field is set to "Yes," this field
defines the number of minutes before a meeting is terminated (if the
system does not detect an active speaker).
Possible values range from 1 to 59 minutes. The default is 10 minutes.
To register new or modified settings, click Apply.
To restore the original settings, click Reset.
shows the Static Meetings screen.
Highest Detail, Best Motion: 4Mbps 1080p
Highest Detail, Better Motion: 3.5Mbps, 1080p
Highest Detail, Good Motion: 3Mbps, 1080p
High Detail, Best Motion: 3Mbps, 720p
High Detail, Better Motion: 2Mbps, 720p
High Detail, Good Motion: 1Mbps, 720p
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
Creating and Editing Static Meetings
5-45