Installing Ctms Administration Software; Contents; Prerequisites - Cisco MCS 7800 Series Administration Manual

Installing CTMS Administration Software

Initial Release: May 5, 2008, OL-12586-02
Last Revised: August 4, 2008

Contents

•
•

Prerequisites

Before you install the Cisco TelePresence Multipoint Switch (CTMS) Administration software system
files, you need the following equipment and information:
•
•
•
•
•
OL-12586-02
Prerequisites, page 3-17
Installing the CTMS Administration Software, page 3-18
Cisco TelePresence System (CTS)-1000 Release and/or CTS-3000 assembled and configured to
support TelePresence conferencing. For more information, refer to the following guides:
Cisco TelePresence System Release 1.3 Administrator's Guide
–
Cisco TelePresence 3000 Assembly, Use & Care, and Field Replacement Unit Guide
–
– Cisco TelePresence 1000 Assembly, Use & Care, and Field Replacement Unit Guide
Cisco MCS-7845-H2 or MCS-7845-I2 Media Convergence Server, installed and connected to a
Domain Name System (DNS) server and your network.
Console able to access the Cisco MCS-7845-H2 Series Media Convergence Server.
DVD that contains the CTMS Administration software application.
Cisco Unified Communications Manager (Unified CM) 6.0 or higher configured to support CTS
Release 1.3 and integrated to work with CTMS, meaning that a SIP security profile, SIP trunk, and
route pattern specific to CTMS have been created. For more information about Unified CM for CTS
configuration, refer to Cisco Unified Communications Manager Installation Guide for the Cisco
TelePresence System.
C H A P T E R
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
3
3-17