Table of Contents
Advertisement
Chapter 1. Introduction
PHYSICAL DESCRIPTION
1-4
The Full Drop and Insert is an option module which plugs
into the option slot in the rear of the TSU 100/600.
See Figure 1-2.
Figure 1-2. Full Drop and Insert Option Module
The D & I rear panel includes a plastic plug over a cutout for
a V.35 connector. This allows a V.35 Nx56/64 or an OCU DP
interface plug-on board to be added to the D & I card.
The PORT X.1 identification on the rear panel is linked to the
port numbering philosophy of the TSU 100/600 product
family. The
represents the slot number, and the
X
the port number. For the TSU 100 application, there is only
one option slot. Therefore the port designation for the D & I
port is 1.1. If added, the Nx56/64 or OCU DP port
designation would be
front panel LCD menu displays.
Drop and Insert Option Module User Manual
. These port numbers appear in the
1.2
indicates
.1
61200065L1-1
Advertisement
Table of Contents
