Guide To The Routine Maintenance On The Management Software - Symantec NetBackup 5000 Routine Maintenance

BackupStore 5000
Routine Maintenance
4
Guide to the Routine Maintenance On the
About This Chapter
This section describes the maintenance items on the management software, including viewing
alarms and querying hardware state.
4.1 Viewing Hardware Alarms
This section describes how to view hardware alarms on the system monitoring interface of the
NetBackup 5000 management software. By viewing current hardware alarms, you can know
whether errors occur on the hardware and timely correct the errors.
4.2 Checking the CPU State
This section describes how to check the CPU state on the system monitoring interface. By
checking the state of the CPU, you can know whether the CPU works normally.
4.3 Viewing the Disk State
This section describes how to check the disk state on the system monitoring interface. By
checking the disk state, you can know whether the disk works normally.
4.4 Check the RAID Group State
This section describes how to check the RAID group state on the system monitoring interface.
By checking the RAID group state, you can know whether the RAID group works normally.
4.5 Checking the Fan State
This section describes how to check the fan state on the system monitoring interface. By
checking the fan state, you can know whether the fan works normally.
4.6 Checking the Power Supply State
This section describes how to check the power supply state on the system monitoring
interface. By checking the power supply state, you can know whether the power supply works
normally.
4.7 Checking Miscellaneous Information
This section describes how to check the miscellaneous information on the system monitoring
interface.
Issue 01 (2010-03-26)
4 Guide to the Routine Maintenance On the Management
Management Software
Symantec Corporation
Software
4-1