Checking The Indicator State; Table 3-3 Description Of The Netbackup 5000 Indicators - Symantec NetBackup 5000 Routine Maintenance

3 Guide to the On-Site Routine Maintenance of the
Device
Step 9 Check whether the service network cables are connected to the service network ports and host
ports/switch properly.
Step 10 Check whether the serial port is connected to a switch.
Exception Handling
If an error occurs when a previous item is being checked, correct the error according to the
description in

3.3 Checking the Indicator State

This section describes details on indicators of the NetBackup 5000 and how to handle an
abnormality indicator.
Reference Standard
Table 3-3
running state of the NetBackup 5000 by observing the indicators.

Table 3-3 Description of the NetBackup 5000 indicators

Location
Chassis
Disk module
Power
3-4
Table 3-2.
describes the NetBackup 5000 indicators. You can initially check the current
Indicator
System power indicator
System alarm indicator
System location indicator Orange
Disk online indicator
Disk read/write indicator
Power running/alarm
Symantec Corporation
Color Status
Green On
- Off
Red On
- Off
On
Green On
Red On
- Off
Green Blinking
- Off
Green On
BackupStore 5000
Routine Maintenance
Description
The device is powered
on.
The device is not
powered on.
The device is out of
service or an alarm is
generated.
The device runs
properly.
a
A device is located.
The disk is powered on
properly.
An alarm is generated
on the disk.
The disk is not powered
on .
Data is being
transmitted.
No data is being
transmitted.
The power is normal.
Issue 01 (2010-03-26)