Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, the A logo, Symantec, the Symantec logo, the Checkmark logo, Blue Coat, and the Blue Coat
Page 2
Appliance. with terminal emulation software. The serial connection is used to perform the appliance’s initial configuration. The following procedure describes a typical deployment for CAS-S200, CAS-S400, and CAS-S500 appliances (as shown 4. For CAS-S500 appliances, attach the lug-equipped end Figure 1).
Page 3
Password, then click Sign In. Amber System fault or not yet licensed Search for the appliance you want to register by enter- Amber blinking Critical fault ing its Serial Number, Site ID, or Email. CAS-S200, CAS-S400, CAS-S500...
Page 4
The slide-rail kit includes the following parts: In the Management Console window, choose System > Licensing. Item Click Download License from Symantec. The appliance (2) Front brackets automatically downloads and installs the base license. (2) Inner rails 3.
Page 5
(CAS-S200, CAS-S400) or rear- For weight stability, load the rack from the bottom up. ward (CAS-S500) until they snap into place. Secure Read the “Rack Mount Warnings”...
Page 6
Power On the Appliance and Verify LEDs. See below for support and additional documentation. Symantec Technical Support For Symantec technical support, case management, licenses, and product downloads, go to: support.broadcom.com/security Content Analysis Software Documentation techdocs.broadcom.com Go to and type “content”...
Need help?
Do you have a question about the CAS-S200 and is the answer not in the manual?
Questions and answers