Table of Contents
Advertisement
BackupStore 5000
Routine Maintenance
About This Chapter
This chapter describes operations related to routine maintenance.
5.1 Logging In to the System Monitoring Interface
This section describes how to log in to the NetBackup 5000 system monitoring interface.
5.1 Logging In to the System Monitoring Interface
This section describes how to log in to the NetBackup 5000 system monitoring interface.
Prerequisite
The IP address of the Windows PC to log in to the NetBackup 5000 should be in the same
network segment as that of the NetBackup 5000.
Procedure
Step 1 Open a browser on a Windows PC. Enter http://IP address in the address bar (the IP address
is the IP address of the service network port of the NetBackup 5000). Press Enter and the
login interface is displayed, as shown in
Issue 01 (2010-03-26)
5
Related Operations
Figure
5-1.
Symantec Corporation
5 Related Operations
5-1
Advertisement
Table of Contents
Need help?
Do you have a question about the NetBackup 5000 and is the answer not in the manual?
Questions and answers