Checking The Cpu State; Figure 4-3 Cpu Option - Symantec NetBackup 5000 Routine Maintenance

4 Guide to the Routine Maintenance On the Management
Software

4.2 Checking the CPU State

This section describes how to check the CPU state on the system monitoring interface. By
checking the state of the CPU, you can know whether the CPU works normally.
Impact on the System
None.
Reference Standard
If the CPU is in the Presence detected state, it indicates that the CPU is running normally.
Procedure
Step 1 Log in to the system monitoring interface. For the detailed procedure, see
the System Monitoring
Step 2 Expand the node in the navigation tree, and then click CPU, as shown in

Figure 4-3 CPU option

Step 3 View the CPU state, as shown in
4-4
Interface.
ID-x indicates CPU x (the value of x is 1 or 2).
Symantec Corporation
Figure 4-4. Table 4-3 lists the parameter description.
BackupStore 5000
Routine Maintenance
5.1 Logging In to
Figure 4-3.
Issue 01 (2010-03-26)