Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, the A logo, Symantec, the Symantec logo, the Checkmark logo, Blue Coat, and the Blue Coat
Mount the Appliance. The following procedure describes a typical in-line deploy- ment for SG-S200, SG-S400, and SG-S500 appliances (as shown in Figure 1). For information on other deployments, see the ProxySG software documentation, available at: techdocs.broadcom.com...
Page 3
Wizard attempts to verify the DNS server address and auto-detect link settings. WARNING! It is recommended that you assign a unique Username and Password for each administrator and that you store them in a secure location. SG-S200, SG-S400, SG-S500...
(10) M4x4L screws Click Retrieve. The appliance downloads the base (4) M3L4 screws license from the licensing server and installs it. SG-S200 (Optional) and SG-S400 Rail Kit 4. Activate any add-on licenses that were purchased: Go to support.broadcom.com/security and click My ...
Page 5
For weight stability, load the rack from the bottom up. slide the rails forward (SG-S200, SG-S400) or rearward Read the “Rack Mount Warnings” section of the Safety (SG-S500) until they snap into place. Secure each rail and Compliance Guide.
Page 6
Power On the Appliance and Verify LEDs. See below for support and additional documentation. Symantec Technical Support For Symantec technical support, case management, licenses, and product downloads, go to: support.broadcom.com/security ProxySG Software Documentation techdocs.broadcom.com Go to and type “sg”...
Need help?
Do you have a question about the SG-S200 and is the answer not in the manual?
Questions and answers