Safety Precautions; Warning And Safety Identifier - Symantec NetBackup 5000 Routine Maintenance

Release 6.6.0.2

Hide thumbs Also See for NetBackup 5000:

Table of Contents

BackupStore 5000

Routine Maintenance

About This Chapter

This chapter describes the safety precautions to be followed during routine maintenance.

When installing and maintaining the equipment, observe the precautions indicated by the

warning and safety identifiers to prevent personal injury or equipment damage.

1.2 ESD Prevention

When installing and maintaining the equipment, follow the safety precautions of ESD

prevention to ensure the safety of the human body and the device.

1.3 Short-Circuit Protection

When installing or maintaining the device, use the tools according to the regulations to avoid

short circuit as a result of metallic tools.

1.4 Electrical Safety

When installing and maintaining the equipment, follow the electrical safety precautions to

avoid device damage or human injury.

1.1 Warning and Safety Identifier

When installing and maintaining the equipment, observe the precautions indicated by the

warning and safety identifiers to prevent personal injury or equipment damage.

Table 1-1

identifiers.

Issue 01 (2010-03-26)

lists the warning and safety identifiers on the device and the meanings of the

Symantec Corporation

Safety Precautions

1 Safety Precautions

1-1

Table of Contents

Do you have a question about the NetBackup 5000 and is the answer not in the manual?