Table of Contents
Advertisement
Interaction with Display Settings
Control of the various AirLife
through the use of the Interface Control Knob.
Interface Control Knob Operation
To adjust the %O
1.
Rotate the knob to move the highlight cursor to the different sections of
the screen. See Figure 10. The default location for the highlight cursor
is the Set %O
2.
Select the parameter by pressing the knob when the section you wish to
change is highlighted.
3.
A prompt will appear in the Message Bar at the top of the display
showing the current settings for that feature. Rotate the knob clockwise
to increase the value, counter-clockwise to decrease the value.
16
®
nCPAP Driver features is accomplished
Figure 9: Interface Control Knob
, CPAP, or Flow Target values, follow these steps.
2
.
2
Figure 10: Main Display Screen
®
AirLife
nCPAP Operator's Manual
Advertisement
Table of Contents
