Table of Contents
Advertisement
Medical Air
Inlet
Figure 5: Air and Oxygen Connectors on Driver
•
Plug the external power source into the power connector on the back of
the driver and an AC outlet. See Figure 6.
Warning: When driver is connected to power source, keep
cords clear of walkways to avoid possible cord
entanglement and strangulation.
Note: To obtain the maximum battery life, it is recommended
that the driver remain connected to the power source even
when not in use.
5.
Power on unit and verify that all of the LEDs illuminate. See Figure 7.
14
Figure 6: AC Power Connector on Driver
Power Connector
AirLife
Oxygen Inlet
®
nCPAP Operator's Manual
Advertisement
Table of Contents
