Operator's Manual
Chapter 5 - Operation
Front Panel Indicators and Controls
The front panel consists of a LCD touch screen display with key pad, separate flow
meter controls for adjustment of NCPAP /Pres Low and Pres High and a %O
blender control. Patient circuit connections are located along the bottom panel. LEDs
along the top of the front panel indicate power on, connection to wall AC, active
alarms and Transducer Interface connection to the driver. An ambient light sensor is
located under the front panel to adjust the backlight of the screen display in high and
low light environments
675-101-101
Revision H
Figure 6 – Front Panel
23
2