Removable Dust Cover (Standard Slms) - THORLABS EXULUS-HD2 User Manual

®
EXULUS Spatial Light Modulators Chapter 3: Introduction
Figure 22 Two Mounting Holes on Bottom, High-Power SLMs
3.4.7.

Removable Dust Cover (Standard SLMs)

Prior to shipping, a magnetically coupled dust cover is installed on the front face
of the Liquid Crystal panel. Remove it before using your SLM. While using the
SLM, the dust cover can be mounted on the back panel of the SLM main unit, as
illustrated in Figure 23.
Figure 23 Two Mounting Holes on the Side and Cover Plate Storage on the Back
(Standard SLMs)
Rev F, December 7, 2020 Page 13