Table of Contents
Advertisement
CUBICON Style Plus-A15 Series
U ser Manual
3. Printing
If you have successfully installed the product according to
C hapter 2. Components and Installation
earlier,
it is recommended to print a sample that is stored in the internal memory in order to test whether the
device operates normally.
After selecting Internal Memory under File, go to the sample folder.
Among files, select the
2 0180912_snowman_01(Style Plus-A15_PLA).cfb
file.
PLA material must be mounted on the filament spool.
If the preparation is completed, start printing by pressing the
button.
Once transmission of the printing file is completed, the following Print screen would be activated, and the
printing progress status can be monitored in real-time.
47
Advertisement
Table of Contents
