Cubicon Style Plus-A15 Series User Manual page 24

CUBICON Style Plus-A15 Series​ ​
U ser Manual
＊The filament spool has directivity.
＊The NFC tag that is mounted on the filament spool also has directivity. (The direction of the
NFC tag is the opposite direction of the company logo and the product sticker.)
The filament spool is designed to supply the filament while rotating counterclockwise.
If the mounting direction changes, it would cause a failure to the product as a problem in the
supply occurs.
Be sure to use the printer after checking whether it is mounted correctly.
＊If there is any obstacle between the spool mounting location and the spool that interrupts
the rotation of the spool during the mounting of the spool, it would cause a failure to the
product as a problem in the supply occurs.
Remove a foreign substance on the spool holder if there is any during mounting of the spool
into the spool holder.
＊Teflon tube is a moving passage from the automatic feeder to the extruder.
Since the length of the Teflon tube is optimized for the printer, if you pull the tube with an
excessive force, it may cause a breakdown as the movement of the filament becomes
unsmooth as the tube would be folded or tangled inside the printer. Do not fold, cut, or pull
the Teflon tube that has been mounted with an excessive force.
* Be cautious not to let a filament be loosened when taking off the filament spool that the
filament is remaining, and fix the filament to the spool so that it wouldn't get loosened during
the storage. If the filament gets loosened, it would cause a tangle when it is used again.
* Be cautious not to expose the filament that has been left after the use to the external
environment such as humidity and dusts by sealing it. The filament shall be used as much as
possible once it is opened.
If the filament is exposed to the external environment for a long time, the printing quality may
get lowered or the problem of the adherence to the bed may occur due to the pollution by the
humidity or other causes. In more severe cases, the extruder may fail to discharge.
24