Cubicon Style Plus-A15 Series User Manual page 18

※​ Names of Each Part inside of the Printer (Inside)
Since the nozzle and heating bed of the extruder part get heated to high temperature
during printing, be sure not to touch them.
CUBICON Style Plus-A15 Series​ ​
[1] Teflon Tube
[2] Extruder
[3] Clean Filter
Case
[4] Heating Bed
[5] Internal LED
Lamps
18
U ser Manual
A passage to supply a filament to
the extruder of the printer (Be
cautious not to be folded.)
An extruder that moves the
filament and melts it with a nozzle.
Casing part that the clean filter is
mounted
A platform where the printout is
printed during printing
LED lamps that show the internal
condition of the printer