Caution For The Safety - Cubicon Style Plus-A15 Series User Manual

Caution for the Safety

Before using the printer, be sure to read 'Safety Manual' and comply with the instruction.
It is an instruction to prevent the injury of the user or the third party and the damage of the printer.
If this instruction is not complied, a serious injury or damage to the printer may occur.
Warning: Failure to comply may cause a serious injury or a property loss.
Caution: Failure to comply may cause an injury or a property loss.
Note: A useful tip or additional info for the use is displayed.
Connect the printer only to the power outlet with a ground connection.
Connect the printer only to the independent single phase power at 220V 10A or higher.
Since high heat is generated while the printer is operating, there is a risk of burn if a
body part or an object is inserted into the printer while it is operating. If there is a need to
insert a body part or an object into the printer, make sure to fully cool it down after
stopping the operation completely.
Since high current power is applied to the heating bed, be cautious about an electric
shock when touching the bed (especially when touching the power supply module of the
bed).
The printer uses moving parts such as a motor, a belt, gears, and fans. There is a risk of
injury due to the jamming if a body part or an object is inserted into the printer while it is
operating.
Since there is a risk of fire or shock if water, other liquid, a piece of metal or other
conductive substance gets into the product, be cautious. Also, since there is a risk of fire
or electric shock, do not operate it with a wet hand.
Since there is a risk of injury to children or pets by the printer, be cautious about the
place of the installation. If there is any child or pet around the printer, observation and
protection are required.
The printer and accessories include parts with sharp edges. Be cautious about an injury
to the human body or damage to the printer.
CUBICON Style Plus-A15 Series​ ​
6
U ser Manual