Table of Contents
Advertisement
Motion(Drive gear)
It is a screen that can test the actual discharging and rewinding functions by operating the filament drive
gear of the Extruder.
●
Status screen : It is a status screen that displays the nozzle temperature and the length that has
been discharged.
●
Operation screen: It is a button for discharging through the nozzle or rewinding.
Since cracking or clogging may occur if the temperature of the nozzle doesn't match that of the
inserted filament and the nozzle is not sufficiently heated, be cautious during the use.
CUBICON Style Plus-A15 Series
37
U ser Manual
Advertisement
Table of Contents
