Opening Of Packaging - Cubicon Style Plus-A15 Series User Manual

Opening of Packaging

When opening the packaging and installing the product, be cautious since the contents
may get damaged if you apply excessive force or tear the packaging forcibly.
When opening the packaging, be cautious not to damage the operation cable of the
extruder or the Teflon tube by pulling, folding, or pressing since they are used for
the extruder operation and the supply passage for the filament.
①​ Put the product packaging on a flat surface, open a box, remove a packaging material on the top, and then take
out a packaging material on the side which contains accessories.
Since heavy items such as a filament spool are contained, be cautious not to drop them.
Be cautious not to let a feeder and an accessory box collide with each other.
②​ Take out a product inside of the packaging vinyl, and move it to the place of the installation.
Since there is a risk of dropping the product due to the tear of the vinyl if the product is taken out by only
holding the vinyl, take out the product by holding the product.
CUBICON Style Plus-A15 Series​ ​
14
U ser Manual