Table of Contents
Advertisement
Control
Control is a screen that can execute Filament Loading/Unloading and Preheat operations.
Each internal function gets configured by sharing the control screen so that the extruder and bed
temperature would be able to be set according to the material.
Control(Filament)
●
Function Selection : One among Filament / Preheat screens can be selected.
●
Extruder Materia l : It is a button for selecting a type of filament that would be used to execute
each function. Since NFC tag is built into Cubicon filament, it is designed to detect it
automatically.
●
Extruder Selection : It is a button for selecting an extruder that would execute Loading /
Unloading tasks.
●
Temperature Screen : Current temperature/setting temperature that are appropriate for the
selected material are expressed for each element.
Bed gets activated only when it is under Preheat operation.
●
Temperature Adjustment : A user can arbitrarily increase or decrease the temperature of the
selected material. As for the method, it can be adjusted after touching each element of the
temperature screen.
●
Operation Selection : After selecting an operation to perform such as loading/unloading, the
operation can be started by pressing the Start button (which gets activated after the preheating is
completed) after the preheating is sufficiently executed.
CUBICON Style Plus-A15 Series
<Info>
31
U ser Manual
Advertisement
Table of Contents
