Mounting The Filament Spool - Cubicon Style Plus-A15 Series User Manual

Mounting the Filament Spool

1 Prepare the filament spool to be used.
Remove a fixing tape on the filament, and cut
off the filament that has been bent. Be cautious
not to damage NFC tag ​
dotted circle) ​
d uring the process. Also be
cautious not to let the filament get loosened
until the spool is mounted. ​
direction of the NFC tag is correct, which is to
be in the opposite direction from the label.
③​ Insert the filament spool into the spool holder, and
insert the filament into the filament inlet of the automatic
feeder up to the dotted line.
Be cautious about the rotation of the spool and the
insertion direction of the filament when mounting the
spool. Also, be cautious not to damage NFC.
CUBICON Style Plus-A15 Series​ ​
( marked with a red
C heck whether the
④​ Insert the filament into the filament feeder up to the
dotted line so that auto loading can be operated.
Maintain the state of the Teflon tube as it is mounted
to the extruder module.
23
2 Insert the spool holder into the spool holder
mounting hole at the rear of the printer.
Mount the spool holder accurately so that it
doesn't fall out.
U ser Manual