Sbus Component Removal; Removing An Sbus Card; Figure 1 Sbus Card Removal - Sun Microsystems Sun Enterprise 10000 Instructions Manual

SBus Component Removal

Removing an SBus Card

1. Disengage the SBus card by pulling the handle up.
Caution – The connector housing could break if the SBus card is tilted too far.
2. Lift the SBus card from the socket at an angle while guiding the card out from the
personality plate opening (
3. Place the SBus card in an antistatic bag.
SBus Card Removal
FIGURE 1
).
FIGURE 1
SBUS 0 SLOT 0
SBUS 0 SLOT 1
SBUS 1 SLOT 0
SBUS 1 SLOT 1
Personality plate with
EMI gasket
Installing PCI Components on the Sun Enterprise 10000 System 3