Setting For Brc4M Series - Daikin VRV S RXQ4/5ARV1 Service Manual

Address Setting for Wireless Remote Controller
4.2

Setting for BRC4M Series

The address for the wireless remote controller is set to 1 at the factory. To change the setting,
proceed as follows:
1. Press the FILTER SIGN RESET button and the INSPECTION button for at least 4 seconds
2. Press the SELECT button and select a multiple setting (A/b). Each time the button is
3. Press the TEMP buttons to set the address.
4. When the RESERVE button is pressed, the setting is confirmed and the usual display
46
to enter the Field Setting mode.
(SETTING is indicated on the display.)
pressed the display switches between A and b.
Address can be set from 1 to 6, but set it to 1-3 and to the same address as the receiver.
(The receiver does not work with address 4-6.)
returns.
Address
Multiple setting
4
1
SiAF332111E
3
2
Part 3 Remote Controller