Brc4M Series - Daikin VRV S RXQ4/5ARV1 Service Manual

Names and Functions
2.2

BRC4M Series

2.2.1 Remote Controller
1
3
7
8
10
12
DISPLAY (SIGNAL TRANSMISSION)
1
This blinks when a signal is being transmitted.
DISPLAY
This display shows the current OPERATION
2
MODE. Operation modes supported depend
on the model that is connected.
DISPLAY NOT AVAILABLE (displayed when
operation is not supported)
3 When a button for a function that is not
supported on the connected model is pressed,
this displays for 2 seconds.
DISPLAY
4
This display shows the set temperature.
DISPLAY
5
This display shows PROGRAMMED TIME of
the air conditioner start or stop.
6
DISPLAY
DISPLAY
7
The display shows the set fan speed.
DISPLAY
When the INSPECTION BUTTON is pressed,
8
the display shows the system mode is in.
Do not operate this button during normal use.
ON/OFF BUTTON
Press the button and the air conditioner will
9
start. Press the button again and the air
conditioner will stop.
40
(OPERATION MODE)
(SET TEMPERATURE)
(PROGRAMMED TIME)
(AIRFLOW BLADE)
(FAN SPEED)
(INSPECTION)
13
2
6
4
5
9
11
17
15
16
20
FAN SPEED CONTROL BUTTON
10
Press this button to select the fan speed.
TEMPERATURE SETTING BUTTON
11
Use this button for SETTING TEMPERATURE.
BACKLIGHT BUTTON
12
Press this button to turn the backlight on or off.
SIGNAL TRANSMITTER
13
This sends the signals to the indoor unit.
PROGRAMMING TIMER BUTTON
14
Use this button for programming "START and/
or STOP" time.
15 TIMER MODE ON/OFF BUTTON
16 TIMER RESERVE/CANCEL BUTTON
17 AIRFLOW DIRECTION ADJUST BUTTON
OPERATION MODE SELECTOR BUTTON
Press this button to select OPERATION MODE.
(COOLING),
18
DRY).
FILTER SIGN RESET BUTTON
19 Refer to the section of MAINTENANCE in the
operation manual attached to the indoor unit.
INSPECTION BUTTON
This button is used only by qualified service
20
persons for maintenance purposes.
Do not operate this button during normal use.
SiAF332111E
18
14
19
(FAN), (PROGRAM
Part 3 Remote Controller