Chapter 4
Configuring SPA9000 Features
•
For SPA92x, 94x, or 925, press Menu on the IP phone and Navigate down to Product Info >
Software Version.
Step 4
If the firmware version is lower than 4.1.12, click Upgrade.
The system displays Page 3, shown in
Figure 4-2
Step 5
Select the MAC address or station name of the IP phone you are configuring and click Next.
The system displays Page 4, shown in
Figure 4-3
Step 6
Identify the station name, select an extension number for each available extension, and click Next.
Step 7
Click Finish on Page 5, and if you want to configure additional clients, select the required option on the
final page.
Document Version 3.01
Figure
Client Station Setup Wizard—Page 3
Figure
Client Station Setup Wizard—Page 3
Using the Wizard to Configure SPA9000 Voice Features
4-2.
4-3.
Linksys SPA9000 Administrator Guide
4-3