Linksys SPA9000 Administrator's Manual page 203

Chapter 6 SPA9000 Field Reference
Field
Proxy Fallback Intvl
Proxy Redundancy Method
Voice Mail Server
Mailbox Subscribe Expires
Mailbox Subscribe URL
Mailbox Deposit URL
Mailbox Manage URL
Mailbox Status
Document Version 3.01
Description
This parameter sets the delay (sec) after which the PAP2T will retry from the highest
priority proxy (or outbound proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and backup proxy server list is
provided to the PAP2T via DNS SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion of priority and so all hosts will
be considered at the same priority and the PAP2T will not attempt to fall back after a fail
over).
The default is 3600
PAP2T will make an internal list of proxies returned in DNS SRV records. In normal mode
this list will contain proxies hierarchied by weight and priority
if Based on SRV port is configured the PAP2T does normal first, and also inspect the port
st
number based on 1 proxy's port on the list.
The default is Normal.
Identifies the voicemail server.
Identifies when the mailbox subscription expires.
The default is 30.
URL that should receive the SUBSCRIBE messages, so the SPA9000 receives voicemail
status notification for all mailboxes on this line.
Note: This parameter allows $USER and $PROXY macros, such as $USER@$PROXY
URL that the SPA9000 contacts when clients and external callers need to deposit
voicemail in any of the mailboxes on this line.
Default is blank. This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
URL that the IP telephony contacts when it needs to check voicemail for any of the
mailboxes on this line.
Default is blank. This parameter allows $USER, $PROXY, and $MBID macros, such as
$USER@$PROXY, or $MBID@$PROXY.
Mailbox status for all the mailboxes associated with this line interface. The status is
automatically updated when the SPA9000 receives voicemail status notification from the
ITSP.
Format: [mbs[,mbs[,mbs[,...]]]] where:
•
mbs = mbid:new/old
•
mbid = mailbox ID, such as 12345
•
new = number of new messages in mailbox: 0,1,2,...
•
old = number of old messages in mailbox: 0, 1, 2, ...
Linksys SPA9000 Administrator Guide
Line 1/2/3/4 Tab
6-55