Configuring Auto-Attendant
Using the Wizard to Configure the Auto-Attendant
You can use the Setup Wizard to customize a schedule for Auto-Attendant. To do this, complete the
following steps.
Step 1
Select Auto Attendant from the Advanced Feature Menu (see
Figure 5-2
The system displays Page 1, shown in
Select Auto Attendant from the Advanced Feature Menu (see
Linksys SPA9000 Administrator Guide
5-4
Auto Attendant Option
Figure 5-3
Chapter 5
Configuring the LVS Auto-Attendant
Figure
5-2).
Figure
5-2).
Document Version 3.01