Linksys SPA9000 Administrator's Manual page 50

Initial Setup and Configuration
Step 4
Select one of the following types of devices to upgrade:
•
SPA941/921
•
SPA942/922
•
SPA962
•
SPA901
•
SPA9000
•
SPA400
Step 5
Click Next.
Step 6
The system displays Page 2 of the Software Upgrade Wizard (see
Figure 2-14 Software Upgrade Wizard—Page 2
Step 7
Type the IP address of the device you are upgrading and enter the Administrator account password, if
this is set.
1.
To determine the IP address of a SPA92x or 94x phone, press the Menu button,
2.
Scroll down to Network and press the left button (Select).
3.
Note the Current IP address, and enter it into Page 2 of the Software Upgrade wizard.
To determine the IP address of a SPA901 phone, pickup the handset, press ****, followed by 110#.
Step 8
Click Next on Page 2 of the Software Upgrade wizard.
Figure 2-15
Figure 2-15 Upgrade Prompt
Step 9
Click OK to confirm the upgrade operation.
Linksys SPA9000 Administrator Guide
2-20
illustrates the Upgrade Prompt that appears.
Chapter 2 Getting Started
Figure 2-14
Document Version 3.01