Configuring The Streaming Audio Server; Enhancements In Release 5.1; Bridge Mode - Linksys SPA9000 Administrator's Manual

Enhancements in Release 5.1

Configuring the Streaming Audio Server

The following provides step-by-step procedures for implementing a SAS with an external music source.
Connect an RJ-11 adapter between the music source and an FXS port on the SPA9000 (Phone 1 or Phone
Step 1
2).
Step 2
On the administration web server, click the SIP tab and scroll down to the Streaming Audio Server
section (see
Figure 4-16 Enabling the Streaming Audio Server
Step 3
On the SAS Enable pull-down selection list, select yes.
Step 4
In the MOH Server field of the Call Feature Settings section, enter the User ID configured for the line
attached to the audio source.
Step 5
Click Submit All Changes.
Enhancements in Release 5.1
This section describes feature enhancements introduced in Release 5.1 of the SPA9000. It includes the
following topics:
•
•
•
In addition, Release 5.1 introduces downloadable prompts for the Auto-Attendant, a feature that is useful
for localization of the SPA9000. For more information about this feature, see the
Prompts" section on page

Bridge Mode

In Release 5.1, the <CWFD Bridge Mode> and the <XFER Bridge Mode> parameters were added to
improve the way that the SPA9000 handles call forwarding and call transfer. This section describes the
added functionality provided and includes the following topics:
•
•
Linksys SPA9000 Administrator Guide
4-32
Figure 4-16).
Bridge Mode, page 4-32
REGISTER Enhancement, page 4-33
Renew DHCP On SIP Request Timeout, page 4-34
5-8.
Call Forward Bridge Mode, page 4-33
Call Transfer Bridge Mode, page 4-33
Chapter 4 Configuring SPA9000 Features
"Downloading
Document Version 3.01