Linksys SPA9000 Administrator's Manual page 136

Switching Between Alternative AAs Using the IVR
Table 5-3
Weekends/Holidays
DayTime
Linksys SPA9000 Administrator Guide
5-12
Parameter Descriptions
This parameter defines the dates of weekends and holidays.
Format:
[wk=n1[,ni];][hd=mm/dd/yyyy|mm/dd/yyyy-mm/dd/yyyy[,
mm/dd/yyyy|mm/dd/yyyy-mm/dd/yyyy];]
The abbreviation wk stands for weekend. The value can be any number, 1 to 7,
to represent Monday to Sunday. Up to four weekend days can be defined.
The abbreviation hd stands for holiday. You do not have to include the year
(yyyy) if you want the same date to apply every year.
Example:
wk=6,7;hd=1/1,7/4
In this example, the weekend includes Saturday (6) and Sunday (7), and the
holidays are January 1st and July 4th every year.
This parameter defines the daytime hours. (The other hours are considered
nighttime hours.)
Format:
start=hh:mm:ss;end=hh:mm:ss
The abbreviation hh stands for hours and uses the 24-hour format. The
abbreviation mm stands for minutes, and the abbreviation ss stands for seconds.
Example:
start=9:0:0;end=17:0:0
In this example, the start time is 9 AM and the end time is 5 PM. The other
hours (5 PM to 9 AM) are considered nighttime hours.
If you do not enter start and end times, then the whole day (24 hours) is
considered as daytime, so the nighttime Auto-Attendant is disabled, even if the
NightTime AA parameter is set to yes (enabled).
Chapter 5 Configuring the LVS Auto-Attendant
Document Version 3.01