Using The Administration Web Server To Configure The Auto-Attendant - Linksys SPA9000 Administrator's Manual

Configuring Auto-Attendant
Figure 5-5
Step 3
Select the extensions to ring for the receptionist.
Step 4
Select the hunt group to ring in response to user input.
Use the Hunt Groups option on the Advanced Features menu to configure the hunt group. For more
information about hunt groups, see the
the"Using Call Hunt Groups" section on page

Using the Administration Web Server to Configure the Auto-Attendant

Each message is internally referred to as Prompt x, x being a number ranging from 1 to 10. The following
parameters are the minimum that must be configured.
•
•
•
•
Figure 5-6
Linksys SPA9000 Administrator Guide
5-6
Auto Attendant Wizard—Page 3
Contact List. This is a list of clients that the SPA9000 alerts when there is an incoming call on the
line. The Auto-Attendant must be included on this list. By default, the Auto-Attendant is the only
client on this list, so the Auto-Attendant picks up every call. You can decide to have the
Auto-Attendant pick up a call if a number (or group) of clients did not pick up the call first. This
parameter is configured on the Voice - Line x (x is 1-4) screen of the administration web server.
AA Script. The SPA9000 lets you program the Auto-Attendant instructions using XML scripts.
These parameters, AA Scripts 1-3, are configured on the Voice - SIP tab on the administration web
server. Only one script is active at a time. Scripting is described in more detail below.
AA Dial Plan. The Auto-Attendant parses the user input according to one of the two parameters, AA
Dial Plan 1 or 2. The AA Script includes a reference to one of these two dial plan parameters through
the dial plan instruction. These parameters are configured on the Voice - SIP tab on the
administration web server.
DayTime AA Script. This defines which of the three scripts (AA script 1, 2, or 3) should be used for
daytime hours. This parameter is configured on the Voice - SIP screen of the administration web
server.
illustrates the Auto-Attendant parameters on the administration web server.
Chapter 5
"Configuring a Call Hunt Group" section on page 4-6
4-19.
Configuring the LVS Auto-Attendant
and
Document Version 3.01