Sip Tab; Sip Parameters - Linksys SPA9000 Administrator's Manual

Chapter 6 SPA9000 Field Reference

SIP Tab

This section describes the fields for the following headings on the SIP tab:
•
•
•
•
•
•
•
•
•
•

SIP Parameters

Field
Max Forward
Max Redirection
Max Auth
SIP User Agent Name
SIP Server Name
SIP Reg User Agent Name
SIP Accept Language
DTMF Relay MIME Type
Document Version 3.01
SIP Parameters, page 6-7
SIP Timer Values (sec), page 6-8
Response Status Code Handling, page 6-10
RTP Parameters, page 6-10
SDP Payload Types, page 6-11
NAT Support Parameters, page 6-13
PBX Parameters, page 6-14
Internal Music Source Parameters, page 6-17
Auto Attendant Parameters, page 6-18
PBX Phone Parameters, page 6-21
Description
SIP Max Forward value, which can range from 1 to 255.
The default is 70.
Number of times an invite can be redirected to avoid an infinite loop.
The default is 5.
Maximum number of times (from 0 to 255) a request may be challenged.
The default is 2.
User-Agent header used in outbound requests.
The default is $VERSION. If empty, the header is not included. Macro expansion of $A
to $D corresponding to GPP_A to GPP_D allowed.
Server header used in responses to inbound responses.
The default is $VERSION.
User-Agent name to be used in a REGISTER request. If this is not specified, the <SIP User
Agent Name> is also used for the REGISTER request.
The default is blank.
Accept-Language header used. There is no default (this indicates SPA9000 does not
include this header). If empty, the header is not included.
MIME Type used in a SIP INFO message to signal a DTMF event.
The default is application/dtmf-relay.
Linksys SPA9000 Administrator Guide
SIP Tab
6-7