Linksys SPA9000 Administrator's Manual page 47

Chapter 2 Getting Started
Figure 2-10 SPA Setup Wizard—Page 9
Step 7
Type the IP address of the SPA9000 on the Internet.
To determine the Internet IP address of the SPA9000:
1.
Pickup the handset of an analog phone connected to the Phone 1 port of the SPA9000.
2.
Press ****.
3.
Press 110# and note the address.
Step 8
Type the Administrator account password on Page 9 if this has been supplied to you. Otherwise, leave
this field blank.
Step 9
Click Next.
The system displays Page 10 of the Setup Wizard, which is the last page required to establish basic
connectivity for the system (see
Figure 2-11 SPA Setup Wizard—Page 10
Step 10
Select the connection type (DHCP or Static IP) from the pull-down selection list.
Step 11
If you are using Static IP, type the IP addresses of the primary and secondary DNS servers.
Document Version 3.01
Figure 2-11).
Initial Setup and Configuration
Linksys SPA9000 Administrator Guide
2-17