Installing A Filler Panel; Understanding An Integrated Versus Distributed Solution; Installing The 58 Mm Wide Paper Roll Guide (Optional) - Toshiba 1TN Quick Installation Manual

Installing a filler panel

Based on your printer order, a filler panel might be shipped with your printer. The filler panel is
an important part of your integrated system. It secures your printer in the proper position with
the system unit and other peripherals.
Refer to the installation documentation for your system unit or filler panel for complete
instructions.

Understanding an integrated versus distributed solution

Your printer can be set up in an integrated or distributed configuration. An integrated
configuration has all parts of a system assembled in one location. In an integrated configuration,
you can install the printer on the input/output tray option (using a filler panel to mount the
printer and display) on top of the wide-footprint system unit. You can also mount the printer on
a full-size cash drawer or directly on the counter. A distributed configuration is set up with the
parts of the system in different physical locations.

Installing the 58 mm wide paper roll guide (optional)

The paper roll guide is included in the paper roll kit. To install the 58 mm wide paper roll guide,
complete the following steps.
Note: After the 58 mm wide paper kit is installed, it can only be removed by a service technician.
Once you have used 58 mm wide paper on a printer, you can never go back and use 80 mm wide
paper.
1.
Install the paper roll guide
2.
Align and insert the paper roll guide tabs
shown in Figure 1.
3. Press down to insert the paper roll guide.
Figure 1. Installing the paper roll guide
10
TCx Single Station Printer Installation and Service Guide
into the paper bucket:
A
into the slots on the right side of the printer, as
B
A
B