Computer Setup Menu - HP xw4000 Service & Reference Manual

Setup Utilities and Diagnostic Features

2.1.2 Computer Setup Menu

.
Heading Option
File System
Information
About
Set Time and
Date
Save to Diskette
Restore from
Diskette
Set Defaults and
Exit
Ignore Changes
and Exit
Save Changes
and Exit
Storage Device
Configuration
2–4
Lists product name/type/speed/stepping, cache size, system
ROM family and version, installed memory size, system board
revision, chassis serial number, integrated MAC for enabled or
embedded NIC (if applicable), and asset tracking number.
Provides copyright information
Allows you to set system time and date.
Saves system configuration, including CMOS, to a formatted
blank 1.44-MB diskette.
Restores system configuration from a diskette.
Restores factory default settings and clears all passwords.
Exits Computer Setup without applying or saving any changes.
Saves changes to system configuration and exits Computer
Setup.
Lists all installed storage devices. The following options appear
when a device is selected:
Diskette Type (For legacy diskette drives only)
Identifies the highest capacity media type accepted by the
diskette drive. Options are 3.5" 1.44 MB, 3.5" 720 KB, 5.25"
1.2 MB, 5.25" 360 KB, and Not Installed.
Drive Emulation (IDE devices only)
Allows you to select a drive emulation type for a storage device.
(For example, a Zip drive can be made bootable by selecting
disk emulation.)
Drive Type
Hard disk No emulation options available.
Diskette None (treated as diskette drive)
Disk (treated as hard drive)
CD-ROM None (treated as CD-ROM drive)
Diskette (treated as diskette drive)
Disk (treated as hard drive)
Other (e.g., Zip None (treated as Other)
drive)
CD-ROM (treated as CD-ROM drive)
Diskette (treated as diskette drive)
Description
Emulation Options
Service Reference Guide